Friday, February 26, 2016

Bar Caddy

The past eight months have been a roller coaster ride for me. My life has been turned upside-down and back again more than once. Now that ride is almost over, and I want to polish off a few unfinished posts before I say goodbye.

As I mentioned before, my last big creative spree happened in preparation for Con on the Cob, which took place this past October. This is another build from that event. Con on the Cob is one of the small conventions that my game group, Rogue Cthulhu, has become regulars at. It is a bit of a party con for us, as alcohol is not only acceptable, but multiple parties take place there and are scheduled as regular events (which is not to say it doesn't have a great kid friendly atmosphere too!). Last year (2014), we ran a party after hours called the Friday Night Speak Easy. It was a huge success. With little to no planning, we entertained around 60 people well into the wee hours of the morning, and got kicked out of two different rooms! This year, we put a lot more preparation and planning into our parties, and we ran two of them, The Friday Night Speak Easy, and the Saturday Costume Party with 2D6. 2D6 is a local nerdcore rap group (and yes, that's a thing) we hired to headline the Saturday night party.

Both parties were the stuff of legend! Both nights were packed. We lost count at somewhere north of 100 people each night. And an absolutely INSANE amount of alcohol was consumed. I went a little overboard with all the different kinds of alcohol I brought. I got it into my head that I wanted to make cocktails, since it was a 1920's theme for the Speak Easy, but that means a lot of different liquors and a lot of mixers and garnishes. That means we needed a more efficient way to store and present this stuff. Enter the Bar Caddy v1.0

The Bar Caddy was designed to sit on top of a 6 or 8ft long banquet table. It provides a raised platform for perching spigoted coolers, boxed wines, and drink dispensers, allowing you to put your cup under the tap without having to set the cooler on the edge of the table. It also had several cubbies underneath the platform that are the perfect size for plastic shoe boxes, which can be used to store bar towels, garnishes, condiments, giggers and the like. There is a small back stop across the rear of the cubbies to prevent the bins from being pushed through and off the back of the table, in case the table is not up against a wall.

There are two removable stops at either end of the caddy. They bolt on with small bolts and nuts. This creates a wall to keep containers from tipping over and falling off the end of the caddy. There is also a detached sliding stop that is not fixed to the caddy, but can but up against one of the containers on top, like a book end, to also help keep things from tipping over. I created these stops because wine boxes are tall and narrow, allowing for possible tipping, and because I have several stackable 2 gallon dispenser containers that I wanted to make sure didn't topple over if stacked.

The caddy was constructed from 3/8in plywood, the same as was used for the new lighting rig, posted about previously. It was stained dark brown and given several heavy coats of polyurethane to protect it from spills and drips. I took a lot of pictures during its construction, but didn't take many of it at the party. I had other things on my mind!


Monday, November 9, 2015

Art Deco Snack Bowls

So, at the Rogue Cthulhu Friday Night Speak Easy, at Con on the Cob, I wanted to decorate the room in an art deco style. I had just watched the Great Gatsby for inspiration, and I found some roaring 20's style decorations on eBay, but I didn't have the time or money for that, so I planned to make them myself. Unfortunately, time became a severely limiting factor and I only managed to get one art deco style decoration finished for the show.
These are large dark green salad bowls that I got at a local discount store for $1 each. I spray painted them with gloss black (on the outside only!) and then used aluminum foil tape (the kind used for furnace repair) to make a geometric line pattern on them. I kept the pattern very simple and easily repeatable. I made six of these and I used them as snack bowls and filled them with various kinds of chips and snacks. This was a very small touch that ultimately had next to no impact on the look of the room, but I thought it was a good idea.


Saturday, October 31, 2015

Howard's Place

My photoshop-ing skills are meager at best. But I thought this picture of Howard Phillips Lovecraft tending bar turned out reasonably well, especially given how little time was put into it.
This image was hastily 'shopped together to use as a web advertisement for the Rogue Cthulhu - Friday Night Speak Easy; an alcohol, dance and gaming party held at Con on The Cob, 2015. I liked it so much that I did a little additional touch up to it and had it blown up into two 36"x 48" panels, which were then printed out at OfficeMax on their engineering (blueprint) copier and then glued together with spray adhesive to make one 6ft.x4ft. poster. We hung that poster on the wall next to the actual bar set-up for the Speak Easy party. Total cost: $12 and change.
This second image was also put together as an advertisement for the same event. It didn't turn out nearly as well. The lighting and shadows are all wrong, but it served its purpose.
If I'd had known how little it would cost, I would have blown up more pictures of 1920's bar and party scenes and wallpapered the room with them, instead of spending more than a week making carboard cut-outs of gangsters and flappers.
...But that's another post ;)

Saturday, October 24, 2015

Phonograph Prop Redux

Ha! I'm back! I have parted ways with the second job that kept me from my workshop, so at least until I find another day-job, I am back in the saddle.

The past few weeks have been spent preparing for a convention called Con on the Cob. Over the past few years, Rogue Chtulhu has been making a larger and larger presence there. This year, we took things up a notch, and that included several small builds from yours truly. Lets start things off with a look at my second attempt at a turn of the century style phonograph prop.

Some of you will remember my Steampunk Phonograph that I posted about previously, which was made as a LARP prop for Origins. My second phonograph was made as decoration for a prohibition-era themed party at Con on the Cob, called the Friday Night Speak Easy. For the second version, I re-used the black and gold cardboard horn from the first phonograph prop, but a new body and plumbing were created. This version would look much more like an actual phonograph from the period, without the laser pointer stylus. I would, however, use similar plumbing pipe and fixtures for the brass-work, simply because it was easy and convenient (and I was under a time crunch).

I recently acquired a vintage victrola and a crap-ton of 78rpm disks from a friend who was moving cross country. So I decided to use the vintage disks instead of my poorly fabricated cylinders from version 1. That meant a new body, so that's where we start. The new body was made from some scraps of 3/8in. plywood, some 1/4in. luan paneling, and some molding strips.

Here you can see the basic box shape being glued together. The sides are 3/8in. plywood scraps that were left over from my last lighting rig expansion. The top is a scrap piece of 1/4in. Luan paneling.
Because I only used glue, and no nails or staples, I put some reinforcing strips of molding (some may have been thin scraps of plywood) on the interior side to give it more strength and stability. The bottom of the basic box was left open.
 In order to hide the cut edge of the plywood, and to give some more shape to the box, and make it look a little more authentic, I added some strips of molding. Around the bottom edge, I added quarter round, and along the seams and around the top I used some flat molding (I don't remember what it's called). Unlike the plywood sides, the molding was mitered for a nice clean seam. These were also glued and clamped. No nails or staples were used.
The next step was to center a disk on the top and find out where to put the spindle pin. Because there is no motor, the pin could be just a piece of metal of the appropriate diameter sticking up through the luan top. I searched through my dad's old bolt bins for the right size machine bolt, cut it off with an angle grinder and rounded out the cut tip. After some polishing, it made a fairly convincing spindle. Since it is just a set piece, there isn't even a platen. I just stack two 78s on top of each other to give the illusion of height.
I had already sanded the box thoroughly before adding the molding, so next up was staining and poly. I used red mahogany stain and gloss polyurethane. The difference in base color between the plywood and the luan creates a slight contrast. Also, some of the trim molding was previously stained from another project, so that creates a little contrast too.
With the stain and clear coat dry, the last thing to do was to mount the old horn. I would need some new pipe-work, a stylus, a bracket, and maybe something ornamental.

I looked for a little while to find something to use as a bracket to hold the horn assembly up. I finally settled on a bit of brass scroll work that came from a decorative sconce. It is a little weak for the weight it must hold up, but it looks nice, and though it sags a little with everything assembled, it is holding up so far.
While I was looking through my parts bin for brass bits, I found a nice brass lion head drawer pull that provided just the right amount of ornamentation for the front panel. 
The pipe-work was made from actual copper pipe and pvc painted to look like copper. Trying to match painted copper to real copper is a huge pain in the ass. Especially since copper can vary so widely in hue depending on its state of oxidation. Also, unless you put some clear coat on it, your copper will darken, but your painted pieces will remain the same over time. The selection of pipe pieces was largely dictated by what I had on hand and what would fit together with the least amount of modification.

As for the stylus, I got lucky and found a part form my junk bins that was about the right shape and fit into the pipe end perfectly. It's a cheap tire pressure gauge. I took off the stickers, popped off the glass, ripped off the dial pointer and flipped the dial face backwards so it appears to be blank silver. I put the glass back in place and removed the tip so it would fit better into the diameter of pipe I had chosen.
 The final touch was the needle itself. I looked around for a while to find something that was the right size and shape but would cause the least risk if damage to the 78 disks that it would be sitting on. I settled on a pop rivet. I just drilled a hole in the appropriate spot on the tire gauge and stuffed the pop rivet in the hole. I didn't use a rivet tool, or even glue. I did, however, trim the length of the pop rivet by about half, subsequent to these photos being taken.
 Next I had to paint the pvc parts of the pipe-work and once dry, everything is just dry fitted for final assembly. Only in a couple of places did I use any glue. It can mostly be disassembled. 


 And that's it! I know it's only an approximation of an actual phonograph, but it was a hastily made set piece that would only be seen in the dark and not used or handled. Still, I like it better than the first version. Below are some pictures of it in situ at the Friday Night Speak Easy at Con on the Cob.

I hope you all enjoy this fun little prop. I have a few other small builds from the Con on the Cob show, that I will be posting soon, and who knows, depending on how soon a find another day-job, I may have some more good stuff on the way.




Monday, July 13, 2015

In Ink

I was scrolling through my FaceBook feed the other day and I just happened to stumble onto this image of Charlie Platteborze's new tattoo. I'm not even sure why it showed up on my news feed. I don't know Charlie, and it was posted to a FaceBook group of which I was not a member. 
I'm not even sure how my eye caught it, but a small detail in the above bounty of imagery grabbed my attention. Look closely at the book The Old Gent is holding.
It was the central sigil that first caught my attention. I had to pull up the full sized image to see if my eye really saw what my brain said that it saw. They did! That's a glyph I created for my Book of IOZ manuscript, which has subsequently been used on my Necronomicon fragment pages, as well as on the interior pages of my De Vermis Mysteriis, and on the cover of my Necronomicon that I created for the indie film, Doctor Glamour.
 Yep, the corner bosses and the lock escutcheon cinches it! That's a representation of my Doctor Glamour Necronomicon. Boy, this thing seems to be getting around, doesn't it?

Anyway, it made my day seeing a piece of my work out in the wild like that, so I thought I would share it with all of you.



Tuesday, March 3, 2015

Imitation

is the sincerest form of flattery. The other day I was doing a Google image search, looking for Mythos prop ideas, when I stumbled on this picture on Crudelia's Deviant Art page.

Look familiar at all? I was immediately struck by the similarity of the bosses and hinges to those from my Doctor Glamour Necronomicon, shown below.

Of course, once I got a closer look at the picture, I could finally make out the text that specifically mentions that the design was inspired by my Necronomicon (squee!). I love seeing and hearing about how my work has inspired someone else's! It gives me fuel to trudge on.

I quite like Crudelia's book. In many ways, I like it better than my own (though not in all ways). The sculpts of the hardware are very stylish and have a lot of character to them, though they are a little over the top and cartoonish for a "serious" Necronomicon (imho). He is clearly a better sculptor than me. I wish I could sculpt with that much flair. The painted leather on the boards and the finish on the hardware is also quite nice, and the multiple bookmarks are a nice touch.

I had never seen any of this artist's work before, but having a quick glance at his resume on his Deviant Art page, he has quite the list of accomplishments. It's very impressive.  I am flattered that anything I have done should have made such an impression that he would choose to simulate it in a work of his own.

Seeing as Crudelia's book was finished in 2012 (the year after mine), I'm surprised it took me this long to notice it. If anyone who follows this blog happens to spot something of mine, or clearly inspired by my work, out in the wild, please let me know. I would love to see it.

Saturday, December 6, 2014

What A Crappy Year

I can't believe it's been almost a year since I posted anything to this blog! WTH! My life just isn't the same as it was when I started this. I hardly ever get into my workshop any more. I miss crafting tomes, and making props and binding books. I miss it, but the rest of the world has me stretched so thin, if I ever do have any free time, I just want to veg-out. Still, it's nice to have a reliable income, even if it's not from the kind of work that I want to be doing.

Well, I haven't been in the workshop much this year, but that doesn't mean I haven't made anything. I still make stuff at work (sometimes). Not the kinds of stuff I normally make, but it is enjoyable. So, since the year is almost over, and I just couldn't stand the thought of ending the year with only one single post from way back in January, I thought I would throw up a couple pictures of some of the things I have made while I was at work.

Yep, that's a stairway. And no, I didn't build it. But I did modify it. Those blue parts were built by a professional metal fabricator. They look nice, and they were well made, but they don't actually satisfy OSHA safety requirements. The hand railing was inadequate. No rail on one side, and no mid-rail. So, I had to add a mid-rail, and build a complete railing for the other side. Those ugly brown rusted metal bits, those are mine. I just did that yesterday. Designed it, cut it, welded it, all by my lonesome. My boss never lets me paint anything. He thinks is't a waste of time, and given the life expectancy of just about everything at this plant, he's probably right.

Made the railing to protect this transformer, the day before yesterday. The blue bits were made in-house a few years ago (one of the last projects we were actually allowed to take the time to paint) and were installed elsewhere in the plant. We re-purposed them and added to them (that would be the brown bits) to make a corral around this transformer. Exciting, yes? But wait, there's more.

OOh, look. More hand-railing! I built this over the summer. Just the handrail around the catwalk at the end just above the grey control box. It has a removable gate to make maintenance on the machine easier. I helped build that end of the catwalk too. It was added on. The platform didn't originally extend around that end. Oh, you see that big honkin' trapezoidal thing on top? That's a hopper that feeds into the top of the Artech shredder (the machine that I run as the main part of my job). I built that too. Well, me and a guy named Carl, who doesn't work there any more. We built that a couple of years ago. That thing is built like a brick shit house. Reinforced walls of five-eighths inch thick plate steel. WAY stronger than necessary for the amount and type of material going into it. But I didn't design it.

No, not a hand railing this time. A safety guard (fence). Certain areas have to be gated off if they have mechanical hazards, like moving belts and rollers that could rip your arms off if you got your hand in them (and yes, it has happened, at this plant, though not while I have been working there). I made about a dozen of these metal barriers to cordon off dangerous areas in the past month or two. Unfortunately, they keep falling over in high winds because the angle iron they bought was way too light for the job. But the boss wanted them, and that's what he bought to build them with, so that's what I used. Iv'e also had to repair most of them at least once, because people keep bumping into them with the heavy equipment, and they are so light duty, they bend all to shit if you hit them with anything. C'est la guerre.

So that's been my life recently- safety guards and hand railings. I've built some conveyor belts done a little carpentry work around the plant too, but I don't have any pictures of those (and frankly they are as boring as these anyway). Not as sexy as movie prop tomes or steampunk diving helmets, but it pays the bills, and at least I'm making something. A maker makes, always.

So, Merry Christmas, and thanks for coming and checking out my blog, even though I haven't posted all year. I do have one personal project that I did this summer, sort of an adjunct to a project I did last summer, but I'll save that for another post. It'll give me something to look forward to for next month.